500ml Round PP Container – HL01-014
HL01-014 is a round PP container with a matching lid and IML decoration for a nominal 500ml pack. Compare this exact model with your equipment and intended food application before approving samples.
| Model | HL01-014 |
|---|---|
| Format | Round; nominal 500ml |
| Material | PP body and lid |
| Catalog body dimensions | Approximately Ø95 × 114.2 mm |
| Listed weights | Body 20g; lid 5.4g |
| Handle | No handle listed in the component specification |
| Decoration and closure | IML; snap-on lid and listed tamper-evident feature |
Model-Specific Selection for a Round 500ml Pack
HL01-014 provides a round IML-decorated PP format with a catalog-listed snap-on lid. Its product identity is the model number, not the extra number used in the page address.
Use drawings and samples to establish differences from other 500ml containers before selecting the filling setup or packaging components.
- Product Information
- Model & Artwork Approval
- Filling & Handling
- Packing & Ordering
- Model: HL01-014, round injection-molded PP container.
- Catalog body: approximately Ø95 × 114.2 mm, 20g.
- Catalog PP lid: approximately Ø92.3 × 8 mm, 5.4g.
- IML: listed for body and lid.
- Handle: none listed.
- Closure: snap-on lid and listed tamper-evident feature; confirm the current configuration.
Confirm working fill, brimful capacity and measurement points on the current drawing.
Request model-specific body and lid dielines. Confirm colours, barcode and artwork revision for each design.
Approve decorated samples against the selected HL01-014 drawing. Do not reuse another round container artwork or lid specification without checking fit.
Check the listed 84.5mm support reference against the full rim and equipment drawing. Test the cup and lid with the intended food, fill temperature and closure process.
Validate frozen use, heat exposure, barrier performance and handling separately where required. Microwave or dishwasher suitability and repeated reuse are not established by the catalog material alone.
Request body and lid piece counts per carton, carton dimensions, net/gross weights and pallet arrangement.
The catalog lists 216,000 sets per 40HQ as a loading reference. Reconfirm after the final component and packing specification is agreed.
Include model, quantity, artwork count, application, destination and required timing in the quotation request.
Choose by Model, Rim and Matching Lid
HL01-014 should be selected using its drawing and matching components. Similar-looking 500ml round containers can use different rims or lids.
- Compare the body height, rim and nesting geometry.
- Confirm the lid drawing and closure configuration.
- Check the listed 84.5mm filling-support reference against the equipment.
- Trial the desired fill and headspace with the lid in place.
Use the model number on requests for samples, quotations and repeat orders.
Validate the Pack for Your Food and Distribution
For frozen desserts, assess the filled pack through the intended freezing, storage and transport cycle. For dry snacks or other foods, define the appropriate barrier and shelf-life tests for that product.
- Approve recipe compatibility and usable fill.
- Test denesting, filling and lid application.
- Check closure retention, opening and handling after storage.
- Approve body and lid IML artwork.
- Confirm cartons, pallet arrangement and shipping conditions.
Request evidence for any heating, hot-fill or special processing requirement. The model is not assigned a blanket temperature range by its PP material.
Compare 500ml Container Models
Compare HL01-014 with the HL01-003 round ice cream container or the HL01-017 square container. Check each matched lid rather than assuming interchangeability.
Fujian Henglong Plastic Industrial Co.,Ltd
Email Us：sales@honokage.com
Address：Longchi Development Zone, Jiaomei Town, Taiwanese Investment Zone,
Zhangzhou, Fujian, China
They are different model identifiers. Compare the current body and lid drawings, closure arrangement and equipment trial results before substituting one for the other.
The component specification lists no handle. Confirm any proposed alternative configuration separately before ordering.
Do not assume lid compatibility from nominal volume or appearance. Confirm the matching lid drawing and test closure fit for HL01-014.
It is a catalog filling-support reference. Verify the measurement points, rim geometry and tolerances against the actual equipment.
A validated operating range is not established here. Provide the intended process and request evidence for the selected material, lid and complete filled pack.
Identify HL01-014, intended food and fill, required closure, artwork count, order quantity, destination and delivery timing. Request the current drawing with the sample.