incógnita
Envíe su consulta hoy
Cotización rápida

IML Containers for Custom Food Packaging

Honokage makes IML tubs and cups for ice cream, dairy, butter and dips. Choose an existing mold or discuss a new design for your fill, lid and artwork needs.

Choose an IML Container for Your Product

Start with the food and target net quantity, then compare the selected model’s working fill, outside dimensions, shape, rim, compatible lid and IML label area. A catalogue capacity does not prove usable fill: request a drawing and test a filled sample under your filling, storage and distribution conditions.

Explore Our IML Container Range

Open a category to review available models. Compare capacity, shape, closure and decoration on the exact product page, then shortlist containers for sampling.

IML Containers for Food Applications

Different foods place different demands on fill, closure and handling. Use these examples to identify what to test on your chosen container model.

Why Choose IML Packaging?

Integrated Decoration

Printed artwork is placed in the mold and becomes part of the decorated container surface. Check coverage on the selected body and lid geometry.

Brand Presentation

IML supports detailed color graphics across available label areas. Approve print files and color targets on molded samples.

No Separate Adhesive Label

For a decorated part, the label is incorporated during molding instead of applied as a separate adhesive label afterward. Compare the full project cost for your run.

Verify on Real Packs

Assess appearance after filling, packing, transport and shelf handling. IML decoration alone does not establish sealing, barrier or wear performance.

IML Container Sizes, Shapes & Capacities

Compare round, square and rectangular bodies by the food’s measured occupied volume and the chosen closure. Ask for nominal and brimful volume, then confirm working fill beneath the lid or seal on a filled sample. Check rim profile, outside height, base footprint and stacking against your equipment and shipping case. Many listed food formats use PP; confirm the resin and relevant food-contact documents for the exact model and market.

From Design to Mass Production

Start with your food, target fill, pack dimensions, closure, artwork and order plan. Review an available body-and-lid pair or discuss new tooling where the geometry must change. Approve the drawing, decorated sample, filled-pack fit and inspection criteria before bulk production. Record the agreed model, material, lid and artwork revision so production follows the approved sample.

Container, Lid & Artwork Quality Checks

Agree checks for outside dimensions, rim and lid engagement, IML placement, print appearance and packed-case handling on the selected model. Test representative filled samples through your filling, closing, storage and distribution conditions. For food-contact use, request current documents that cover the actual resin, label, food, temperature and destination market; a generic certificate is not enough.

IML Manufacturing & Project Support

Honokage supports container projects through mold review, injection molding and IML decoration. For the selected model, request the drawing, material specification, matching lid, decorated samples and inspection criteria. Use those documents and a filled-pack trial to approve the configuration before bulk production rather than relying on a general promise of quality.

Custom IML Container Solutions

Start with an available model when its body size, working fill, rim, lid and label area already fit the brief. Depending on the model, review IML artwork, brand colors and compatible lid, material or finish options without changing the mold geometry. Confirm the drawing and representative samples before approval.

If available models cannot meet a required shape, size, working fill or closure interface, share a drawing or reference pack and the intended use. Review feasibility, mold design, decorated samples, fill-line trials and approval criteria before mass production. New geometry requires new tooling; it is not a change to an existing mold cavity.

Customization Details to Specify

Material & Finish Review

Material, color and surface finish options depend on the selected model and intended use. Share the food, temperature, destination market and appearance target; request model-specific material and food-contact evidence before approval.

IML Artwork & Brand Colors

Map the design to the selected body and lid label areas. Provide artwork files and color references, then approve placement and print appearance on molded samples.

Lids, Seals & Functional Fit

Confirm the compatible lid or sealing film, fill-line interface, stacking and transport conditions on the selected body. If barrier, shelf life or end-of-life performance is required, define the test and request evidence for that exact structure.

Banner de contenedor IML 2
Let's Develop Your Custom IML Containers

Send the container type, target working fill and dimensions, food application, IML artwork needs, lid or seal, destination market and estimated quantity. A drawing, current pack or reference sample helps us compare existing models with any new tooling before quoting.

  • Two containers with the same catalogue capacity can differ in working fill, rim profile and case footprint. Compare filled samples and the paired lids before approving a model for production.

    Honokage

Preguntas frecuentes

What types of IML containers does Honokage offer?

The current range includes tubs and cups for ice cream, butter and spreads, yogurt, dips, biscuits, drinks and selected pet-food packaging. Start with the application, target working fill, shape and closure; then check the drawing and sample for the exact model.

Can I customize an IML container using an existing mold?

Yes, model-dependent options may include IML artwork, brand colors, compatible lids and available material or finish choices. The mold fixes the body geometry, so a new height, rim or shape needs separate tooling review. Request the current drawing and a paired body-and-lid sample before approving the selection.

Can you develop a completely new container design?

A new mold can be evaluated when an existing container cannot meet the required shape, working fill, rim, closure or filling-line fit. Provide a drawing or reference pack, dimensions, product use and order forecast. The team can then review feasibility, tooling scope, samples and production approval; timing and cost depend on that brief.

What information is needed for a custom IML container quote?

Send the food or other packed product, target working fill and dimensions, preferred shape, lid or sealing method, IML artwork needs, destination market and estimated order quantity. A drawing, current pack or filling-line details helps the team compare an existing mold with new tooling.

How can I check lid and filling-line compatibility?

Confirm the exact container and matching lid or film, especially rim profile, opening size and closure method. Trial representative filled samples on your equipment and through your intended storage and transport conditions. A nominal capacity alone cannot confirm machine or seal fit.

What affects MOQ and production lead time?

The selected mold, label and material specifications, artwork readiness, order quantity, tooling work and sample approval can all affect the quote and schedule. Share the target volume and launch date so the team can confirm model-specific MOQ and timing rather than assuming a standard figure.

Can I request samples before bulk production?

Ask which existing-model or development samples are available and whether the matching lid is included. Use them to check working fill, closure, label appearance and line handling with your actual product. Confirm the sample specification and any charges or timing before ordering.

What documents should I request for food-contact use?

Request documents for the exact resin, label and finished model against your intended food, contact duration, temperature and destination market. Check that the supplied declaration or test report covers your use; a general material claim is not enough.

How should I approve the finished pack?

Approve the decorated container together with its intended lid or seal. Record the working fill, dimensions, artwork placement, appearance and closure checks on representative samples. Trial the filled pack under your own filling, storage and distribution conditions before authorizing bulk production.

Start Your IML Container Project
Cotización rápida
Scroll al inicio