500ml Drinking Cup – HL10-013
PP drinking cup with IML decoration for branded beverage service.
| Modèle | HL10-013 |
|---|---|
| Format | 500ml cup |
| Matériel | PP |
| Taille du bonnet | Ø90 × 136 mm |
| Cup weight | 16.7g |
| Décoration | IML |
Select the Right HL10-013 Configuration
This model lists a 16.7g cup and a 4.5g lid. Confirm the supplied pair and its fit before testing the filled pack.
- Informations sur le produit
- IML & Artwork
- Filling & Validation
- Packing & Ordering
The catalog lists a transparent PP cup, Ø90 × 136 mm and 16.7g. The white PP lid is listed at Ø91.5 × 21.7 mm and 4.5g. Confirm the current drawing, lid interface and supplied configuration.
The listed 500ml capacity requires a fill trial: establish brimful volume, usable serving level and headspace with the intended lid.
Request the model-specific dieline and available decoration areas. Supply final logos, colours, text, barcode and variable-code requirements.
Confirm quantities by design and approve colour, registration and legibility on decorated samples. Record the final artwork revision for repeat orders.
Agree beverage temperature and holding time, then assess the complete cup and closure. PP construction alone does not establish hot-drink, reheating or leakproof performance.
Specify any hot-fill, HPP, microwave, dishwasher or repeated-use requirement separately and request applicable evidence for the chosen configuration. Ask for food-contact documentation matching the material, contents and intended use.
Request an updated packing specification for cups and lids separately. Confirm pieces per bag and carton before using carton weights or loading estimates.
Confirm component pieces per carton, carton dimensions, net/gross weight and pallet arrangement. State whether quantities cover bodies, lids or complete sets. MOQ and production timing should be quoted for the agreed specification and artwork count.
Match the Cup, Drink and Closing System
Compare the cup rim, serving level and drinking access before choosing a takeaway lid.
Plan the serving volume around the actual beverage, headspace and closure. Specify ice, toppings, drinking access and takeaway handling before selecting the cup.
- Check cup-holder and filling-equipment fit.
- Trial the intended liquid level and lid or sealing film.
- Evaluate grip, opening and transport with filled samples.
From Sample Approval to Bulk Supply
- Drawing: confirm the model, rim, nesting and matching closure.
- Trial: Agree beverage temperature and holding time, then assess the complete cup and closure. PP construction alone does not establish hot-drink, reheating or leakproof performance.
- Artwork: approve the dieline, colours, barcode area and final file revision.
- Supply: agree quantities by design, carton counts, dimensions and delivery timing.
For a quotation, send the model or required size, target fill, process conditions, quantity, artwork count and destination.
Compare Related Packaging
Tasse pour boisson chaude de 500 ml · Printed milk tea cup
Compare each model drawing and matching closure before changing pack size or shape.
666
Fujian Henglong Plastic Industrial Co., Ltd.
Envoyez-nous un e-mail : sales@honokage.com
Adresse : Zone de développement de Longchi, ville de Jiaomei, zone d'investissement taïwanaise,
Zhangzhou, Fujian, Chine
Confirm the cup rim and chosen drinking or sealing system with a matched sample. Specify any straw opening, tamper evidence or transport seal separately.
State the drink temperature and holding time. Request suitability evidence for the exact cup and lid, and assess handling comfort with filled samples.
Check the decoration areas offered for the selected model. Request the correct dielines and approve colours, layout and a physical sample before production.
No. Confirm measured brimful capacity and the working fill below the selected closure. Allow space for ice, toppings and handling where required.
Confirm the current drawing and material, then test the actual fill, closure and distribution conditions. Approve a decorated sample and record the specification and artwork revisions before production.
Provide HL10-013, quantity by design, intended contents and fill, closure and process requirements, delivery destination and timing. Ask for MOQ, sample arrangements, production schedule and confirmed carton data.