Ice Cream Container with Lid – HL01-001
Compact PP ice cream cup with a matching snap-on lid and IML decoration.
| Modell | HL01-001 |
|---|---|
| Kapazität | Confirm working fill |
| Material | PP |
| Form | Runden |
| Schließung | Aufsteckbar |
| Dekoration | IML |
Select the Right HL01-001 Configuration
Approve the 9.8g body and 3.4g lid as a pair. The original catalog has conflicting capacity entries, so use a measured fill trial for your portion.
- Produktinformationen
- IML & Artwork
- Filling & Validation
- Packing & Ordering
Catalog dimensions: body approximately Ø75.5 × 66.1 mm; lid Ø72.8 × 9.5 mm. Component weights: body 9.8g; lid 3.4g. Request the current drawing and matching closure specification before equipment setup.
PP body and lid support IML; a tamper-evident feature is listed. Capacity entries of 125, 170 and 180ml conflict. Request a measured sample and confirm the intended portion. Specify any spoon separately.
Request the model-specific dieline and available decoration areas. Supply final logos, colours, text, barcode and variable-code requirements.
Confirm quantities by design and approve colour, registration and legibility on decorated samples. Record the final artwork revision for repeat orders.
Inspect the complete filled pack through the intended freezing, storage and transport cycle. Check lid retention, deformation, handling and any agreed stacking load.
Specify any hot-fill, HPP, microwave, dishwasher or repeated-use requirement separately and request applicable evidence for the chosen configuration. Ask for food-contact documentation matching the material, contents and intended use.
Catalog loading references: 172,800 sets per 20GP and 437,400 per 40HQ; confirm final packing.
Confirm component pieces per carton, carton dimensions, net/gross weight and pallet arrangement. State whether quantities cover bodies, lids or complete sets. MOQ and production timing should be quoted for the agreed specification and artwork count.
Select the Fill and Frozen Dessert Format
For ready-to-eat portions, check opening force, spoon access and how any utensil is supplied. Specify utensil inclusion and packing separately from the container and lid.
Match the container to your ice cream, gelato or sorbet recipe and sales channel. Portion size, overrun and the lid determine the useful fill.
- Trial the required volume and net weight with the actual product.
- Allow headspace for freezing and clean closure application.
- Check opening, reclosure and product access after frozen storage.
From Sample Approval to Bulk Supply
- Drawing: confirm the model, rim, nesting and matching closure.
- Trial: Inspect the complete filled pack through the intended freezing, storage and transport cycle. Check lid retention, deformation, handling and any agreed stacking load.
- Artwork: approve the dieline, colours, barcode area and final file revision.
- Supply: agree quantities by design, carton counts, dimensions and delivery timing.
For a quotation, send the model or required size, target fill, process conditions, quantity, artwork count and destination.
Compare Related Packaging
Single-serve ice cream cup · Family-size ice cream tub
Compare each model drawing and matching closure before changing pack size or shape.
Fujian Henglong Plastic Industrial Co., Ltd.
E-Mail: sales@honokage.com
Adresse: Longchi Development Zone, Jiaomei Town, Taiwanese Investment Zone,
Zhangzhou, Fujian, China
No. Specify any membrane, liner or required seal performance separately and validate the complete filled pack. A first-opening feature and a hermetic barrier serve different purposes.
Use the current drawing and component samples. Confirm rim, nesting, clearance and tolerances, then test filling and closure application on the actual equipment.
Check the decoration areas offered for the selected model. Request the correct dielines and approve colours, layout and a physical sample before production.
No. Recipe density and overrun affect filled weight. Confirm the intended portion and headspace with your actual formulation and matched lid.
Confirm the current drawing and material, then test the actual fill, closure and distribution conditions. Approve a decorated sample and record the specification and artwork revisions before production.
Provide HL01-001, quantity by design, intended contents and fill, closure and process requirements, delivery destination and timing. Ask for MOQ, sample arrangements, production schedule and confirmed carton data.