Dip Tub Manufacturer – Custom PP & IML Packaging
HONOKAGE supplies PP dip packaging with model selection and custom IML branding.
| Featured model | HL03-013 |
|---|---|
| Catalog volume | 118ml listed |
| Material | PP |
| Verfahren | Spritzguss |
| Dekoration | IML |
| Project route | Existing mold / custom |
Select the Right HL03-013 Configuration
HL03-013 is the featured 118ml catalog example on this page. Other sizes and custom designs require their own drawings, samples, tooling scope and quotation.
- Produktinformationen
- IML & Artwork
- Filling & Validation
- Packing & Ordering
Catalog dimensions: body approximately Ø83.5 × 53 mm; lid Ø87.3 × 18.2 mm. Component weights: body 10g; lid 7.5g. Request the current drawing and matching closure specification before equipment setup.
PP body and lid support IML. A tamper-evident feature is listed. Confirm measured brimful capacity and working fill; a gram entry in the catalog does not establish volume or ice cream net weight.
Request the model-specific dieline and available decoration areas. Supply final logos, colours, text, barcode and variable-code requirements.
Confirm quantities by design and approve colour, registration and legibility on decorated samples. Record the final artwork revision for repeat orders.
Agree any membrane, liner or hermetic seal separately from a snap-on lid. Validate the complete pack for the recipe, fill temperature and planned chilled or ambient storage process.
Specify any hot-fill, HPP, microwave, dishwasher or repeated-use requirement separately and request applicable evidence for the chosen configuration. Ask for food-contact documentation matching the material, contents and intended use.
Catalog loading references: 156,000 sets per 20GP and 374,400 per 40HQ; confirm final packing.
Confirm component pieces per carton, carton dimensions, net/gross weight and pallet arrangement. State whether quantities cover bodies, lids or complete sets. MOQ and production timing should be quoted for the agreed specification and artwork count.
Specify the Dip and Its Filling Process
Start with an existing model such as HL03-013, or discuss a custom shape when the application requires it. Provide the recipe, portion, closure, filling process and artwork count for a scoped proposal.
Choose the tub using the sauce or dip recipe, portion and filling method. Thin sauces, thick spreads and products with pieces place different demands on dosing and closure.
- Trial viscosity, particle size and nozzle access.
- Confirm target net weight and clean sealing surfaces.
- Check lid fit, opening and the proposed distribution cycle.


From Sample Approval to Bulk Supply
- Drawing: confirm the model, rim, nesting and matching closure.
- Trial: Agree any membrane, liner or hermetic seal separately from a snap-on lid. Validate the complete pack for the recipe, fill temperature and planned chilled or ambient storage process.
- Artwork: approve the dieline, colours, barcode area and final file revision.
- Supply: agree quantities by design, carton counts, dimensions and delivery timing.
For a quotation, send the model or required size, target fill, process conditions, quantity, artwork count and destination.
Compare Related Packaging
PP dip tubs · Dip tubs with lids · 230ml sauce packaging
Compare each model drawing and matching closure before changing pack size or shape.
Fujian Henglong Plastic Industrial Co., Ltd.
E-Mail: sales@honokage.com
Adresse: Longchi Development Zone, Jiaomei Town, Taiwanese Investment Zone,
Zhangzhou, Fujian, China
Compare your portion, dimensions and closure with an existing model first. If a new design is needed, agree tooling scope, sample stages, ownership terms and timing in the quotation.
Approve the model drawing, material and closure, decorated sample, actual-product trial, carton plan and artwork revision. Confirm MOQ and quantity by design.
Check the decoration areas offered for the selected model. Request the correct dielines and approve colours, layout and a physical sample before production.
Suitability depends on the formulation, processing, barrier and sealing requirements. Submit the actual application and validate the selected container, lid and seal together.
Confirm the current drawing and material, then test the actual fill, closure and distribution conditions. Approve a decorated sample and record the specification and artwork revisions before production.
Provide HL03-013, quantity by design, intended contents and fill, closure and process requirements, delivery destination and timing. Ask for MOQ, sample arrangements, production schedule and confirmed carton data.














