200ml Ice Cream Jar for Custom Portion Packaging
PP ice cream jar packaging for a 200ml portion project; confirm the matched model.
| Project | 200ml ice cream jar |
|---|---|
| Model reference | Confirm HL01-018 |
| Material | PP |
| Capacity | Confirm by sample |
| Decoration | IML |
| Closure | Confirm configuration |
Select the Right HL01-018 reference Configuration
The current catalog pairs a 200ml title with a 1265ml HL01-018 specification. Request a corrected drawing and measured sample; the listed dimensions should not be used for a 200ml pack.
- Product Information
- IML & Artwork
- Use & Ordering
This page contains a mismatch: its 200ml title is paired with HL01-018, a 1265ml capacity and Ø139 × 126mm dimensions. Do not use those dimensions to specify a 200ml pack. Request the correct model drawing, measured sample and closure specification.
Request the model-specific dieline and available decoration areas. Supply final logos, colours, text, barcode and variable-code requirements.
Confirm quantities by design and approve colour, registration and legibility on decorated samples. Record the final artwork revision for repeat orders.
Inspect the complete filled pack through the intended freezing, storage and transport cycle. Check lid retention, deformation, handling and any agreed stacking load.
Specify any hot-fill, HPP, microwave, dishwasher or repeated-use requirement separately and request applicable evidence for the chosen configuration. Ask for food-contact documentation matching the material, contents and intended use.
Request a quotation and packing specification for the approved model, lid and artwork count. Confirm sample arrangements, MOQ, carton counts and production timing.
Confirm component pieces per carton, carton dimensions, net/gross weight and pallet arrangement. State whether quantities cover bodies, lids or complete sets. MOQ and production timing should be quoted for the agreed specification and artwork count.
Select the Fill and Frozen Dessert Format
Specify the required 200ml working portion and desired jar opening. Confirm the correct body and lid before approving tooling, artwork or equipment dimensions.
Match the container to your ice cream, gelato or sorbet recipe and sales channel. Portion size, overrun and the lid determine the useful fill.
- Trial the required volume and net weight with the actual product.
- Allow headspace for freezing and clean closure application.
- Check opening, reclosure and product access after frozen storage.
From Sample Approval to Bulk Supply
- Drawing: confirm the model, rim, nesting and matching closure.
- Trial: Inspect the complete filled pack through the intended freezing, storage and transport cycle. Check lid retention, deformation, handling and any agreed stacking load.
- Artwork: approve the dieline, colours, barcode area and final file revision.
- Supply: agree quantities by design, carton counts, dimensions and delivery timing.
For a quotation, send the model or required size, target fill, process conditions, quantity, artwork count and destination.
Compare Related Packaging
Small ice cream tubs · Single-serve ice cream cup
Compare each model drawing and matching closure before changing pack size or shape.
Fujian Henglong Plastic Industrial Co.,Ltd
Email Us：sales@honokage.com
Address：Longchi Development Zone, Jiaomei Town, Taiwanese Investment Zone,
Zhangzhou, Fujian, China
No. The published model and capacity entries conflict. Request the correct 200ml configuration, drawing and measured sample before ordering.
Confirm the actual closing system on the selected model. Specify any film, liner or tamper-evident feature separately; a lid name does not establish leakproof performance.
Check the decoration areas offered for the selected model. Request the correct dielines and approve colours, layout and a physical sample before production.
No. Recipe density and overrun affect filled weight. Confirm the intended portion and headspace with your actual formulation and matched lid.
Confirm the current drawing and material, then test the actual fill, closure and distribution conditions. Approve a decorated sample and record the specification and artwork revisions before production.
Provide HL01-018 reference, quantity by design, intended contents and fill, closure and process requirements, delivery destination and timing. Ask for MOQ, sample arrangements, production schedule and confirmed carton data.